Load data for .30 PICRA + .308 | 180gr | Ferrobull Tripple Expand Jagd

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 180gr \| Ferrobull Tripple Expand Jagd
Manufacturer SKU:	J-30-180
Bullet Weight:	180gr \| 11.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	<<locked>>
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B9070_C311
Last updated:	2026-01-31
Recommended Twist Rate:	1:11 - 1:9

Load data for 46 loads in caliber .30 PICRA with .308 | 180gr | Ferrobull Tripple Expand Jagd bullet and 23 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	71%	36332	89%	**45	100%
ADI APS 450	<<locked>>	62%	35911	88%	**2	100%
Accurate 4100	<<locked>>	72%	36492	90%	**43	94%
[Accurate No. 11 FS]*	<<locked>>	80%	36361	90%	**60	88%
Alliant 2400	<<locked>>	68%	35679	88%	**37	96%
Alliant BLUE DOT	<<locked>>	70%	35781	88%	**98	100%
Alliant Herco	<<locked>>	70%	35810	88%	**66	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	73%	36071	89%	**8	100%
Hodgdon H110	<<locked>>	75%	36027	89%	**66	91%
Hodgdon LilGun	<<locked>>	76%	36013	89%	**86	97%
Hodgdon TrailBoss	<<locked>>	97%	26281	65%	**3	100%
Ramshot Enforcer	<<locked>>	68%	36230	89%	**43	97%
ReloadSwiss RS 14	<<locked>>	95%	24874	61%	**0	100%
ReloadSwiss RS 30	<<locked>>	92%	36216	89%	**99	95%
SNPE Vectan A0	<<locked>>	63%	36521	90%	**53	100%
SNPE Vectan BA6 1/2 👍	<<locked>>	93%	36201	89%	**40	99%
SNPE Vectan BA7 1/2	<<locked>>	65%	35375	87%	**93	100%
Somchem S265	<<locked>>	83%	36216	89%	**27	90%
Vihtavuori 3N38	<<locked>>	67%	35853	88%	**78	100%
Vihtavuori N105	<<locked>>	70%	36027	89%	**91	100%
Vihtavuori N110	<<locked>>	84%	35505	87%	**50	97%
Vihtavuori N32C Tin Star	<<locked>>	78%	35882	88%	**2	100%
[Winchester 296]*	<<locked>>	75%	36506	90%	**83	88%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	27557	68%	**40	100%
ADI APS 450	<<locked>>	61%	34592	85%	**8	100%
[Accurate 4100]*	<<locked>>	61%	25976	64%	**86	89%
[Accurate No. 11 FS]*	<<locked>>	68%	24627	61%	**79	80%
Alliant 2400	<<locked>>	61%	29153	72%	**32	93%
Alliant BLUE DOT	<<locked>>	60%	26963	66%	**76	98%
Alliant Herco	<<locked>>	60%	28152	69%	**8	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	61%	27122	67%	**2	100%
[Hodgdon H110]*	<<locked>>	61%	22017	54%	**30	82%
[Hodgdon LilGun]*	<<locked>>	61%	21118	52%	**47	88%
Hodgdon TrailBoss	<<locked>>	94%	25251	62%	**0	100%
Ramshot Enforcer	<<locked>>	61%	28500	70%	**32	94%
ReloadSwiss RS 14	<<locked>>	90%	23032	57%	**7	100%
[ReloadSwiss RS 30]*	<<locked>>	69%	18898	47%	**1	80%
SNPE Vectan A0	<<locked>>	60%	33968	84%	**24	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	14982	37%	**6	85%
SNPE Vectan BA7 1/2	<<locked>>	61%	31908	79%	**56	100%
[Somchem S265]*	<<locked>>	65%	21727	54%	**1	81%
Vihtavuori 3N38	<<locked>>	61%	30443	75%	**06	100%
Vihtavuori N105	<<locked>>	61%	26977	66%	**76	100%
[Vihtavuori N110]*	<<locked>>	61%	17883	44%	**8	85%
Vihtavuori N32C Tin Star	<<locked>>	62%	25788	64%	**3	100%
[Winchester 296]*	<<locked>>	64%	24685	61%	**96	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data